ADT® Authorized Dealer Serving Myrtle Beach & Surrounding Areas
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Myrtle Beach Property

Homeowners must protect against a variety of risks like burglary, fire, and flooding. But what about a danger that can’t be detected by human senses? Carbon monoxide is different from other dangers because you may never be aware that it’s there. Despite that, installing CO detectors can simply safeguard yourself and your household. Find out more about this hazardous gas and where to place carbon monoxide detectors in your Myrtle Beach home.

What Is Carbon Monoxide?

Referred to as the silent killer due to its lack of odor, color, and taste, carbon monoxide is a commonly found gas formed by an incomplete combustion of fuels. Any appliance that utilizes fuels like a fireplace or furnace may produce carbon monoxide. Even though you usually won’t have problems, difficulties can crop up when an appliance is not frequently inspected or adequately vented. These missteps may result in an accumulation of this dangerous gas in your interior. Generators and heaters of various types are commonly responsible for CO poisoning.

When subjected to lower concentrations of CO, you may notice dizziness, headaches, fatigue nausea, or vomiting. Continuous exposure to higher levels can lead to cardiorespiratory failure, and potentially death.

Suggestions On Where To Place Myrtle Beach Carbon Monoxide Detectors

If your home doesn’t have a carbon monoxide detector, buy one now. Ideally, you should install one on each floor, and that includes basements. Here are a few recommendations on where to place carbon monoxide detectors in Myrtle Beach:

  • Place them on each floor, especially in areas where you utilize fuel-burning appliances, like furnaces, fireplaces, gas dryers, and water heaters.
  • You ought to always install one within 10 feet of bedrooms. If you only install one carbon monoxide detector, this is where it should go.
  • Place them at least 10 to 20 feet from sources of CO.
  • Do not position them right next to or above fuel-utilizing appliances, as a little carbon monoxide may be discharged when they turn on and prompt a false alarm.
  • Fasten them to walls approximately five feet above the floor so they can measure air where people are breathing it.
  • Avoid installing them beside windows or doors and in dead-air areas.
  • Install one in spaces above garages.

Check your CO detectors often and maintain them per manufacturer instructions. You will generally have to replace them every five to six years. You should also make sure any fuel-utilizing appliances are in in proper working condition and have adequate ventilation.